Machines with C axis and Turret
Inside illumination
Coolant pump
Warning lamp
Balancing plate, screws, nuts and wedges interpolation
Automatic central lubrication
Collet chuck and key
12 stations servo controlled powered turret (VDI20)
1 pc of axial driven tool
1 pc of radial driven tool memory to 2GB
Foot pedal for chuck control
2 pcs of OD tool holders
2 pcs of ID tool holders
Electronic handwheel
Part catcher
Voltage transformator
Chip conveyor
Bar feeder interface
C axis control
Spindle brake
Air and coolant gun
2 years full warranty
Heat exchanger for electrical cabinet
Voltage transformator
Phase protection relay
Safety door switch
Maintenance handbook
Operating handbook
| Mekamat | 5TC | 6TC | |
|---|---|---|---|
| Work area | max. Turning lenght | 150 mm | 150 mm |
| max. Turning Diameter | 360 mm | 360 mm | |
| X Axis Movement | 450 mm | 450 mm | |
| Z Axis Movement | 230 mm | 230 mm | |
| Y Axis Movement | - | - | |
| Slant bed | 22,5° | 22,5° | |
| max. Pay load | 40 kg | 50 kg | |
| Spindle | max. Chuck holding diameter | 110 mm | 140 mm |
| Chuck size | 5 inches | 6 inches | |
| Spindle nose | Flat 110 | Flat 140 | |
| Collet type | 163E | 173E | |
| Spindle inner diameter | 33 mm | 43 mm | |
| Bearing diameter | 60 mm | 70 mm | |
| max. Bar diameter | 32 mm | 42 mm | |
| Motor power (continuous/30 min.) | 3,7/5,5 kW | 5,5/7,5 kW | |
| max. RPM | 6000 rpm | 5000 rpm | |
| Rated Torque | 35 Nm | 48 Nm | |
| Motor coupling | timing belt | timing belt | |
| C axis positioning | 0,001° | 0,001° | |
| Brake torque | 23 Nm | 23 Nm | |
| Machine Axes | X/Z Axis Motor Power | 0,75 kW | 0,75 kW |
| Y Axis Motor Power | - | - | |
| X/Z Axis ball screw (dia./pitch) | 25/10 mm | 25/10 mm | |
| Y Axis ball screw (dia./pitch) | - | - | |
| X/Z Axis rapid travel speed | 36 m/min | 36 m/min | |
| Y Axis rapid travel speed | - | - | |
| Guide system | Linear | Linear | |
| Live Tools | Axial live tool number | 0-12 | 0-12 |
| Radial live tool number | 0-12 | 0-12 | |
| Motor power (continuous/30 min.) | 1,5/2,2 kW | 1,5/2,2 kW | |
| Tool size | DIN5480/ER16-20 | DIN5480/ER16-20 | |
| max. RPM | 4000 rpm | 4000 rpm |
| Mekamat | 5TC | 6TC | |
|---|---|---|---|
| Turret | Station number | 12 | 12 |
| Positioning system | Servo | Servo | |
| Tool to tool rotation time (including locking) | 0,53 sn | 0,53 sn | |
| Total rotation time (180°) | 0,93 sn | 0,93 sn | |
| Clamping force | 500 kg | 500 kg | |
| Repetition accuracy | ±1° | ±1° | |
| Positioning accuracy | ±1° | ±1° | |
| Tool size | 16 mm | 16 mm | |
| Tool mounting standard | VDI20 | VDI20 | |
| Tool Holders | OD Tool holders | 16 mm | 20 mm |
| ID Tool holders | 20 mm | 20 mm | |
| Coolant System | Tank capacity | 135 L | 135 L |
| Flow rate | 85 L/min | 85 L/min | |
| Pressure | 5 bar | 5 bar | |
| Motor power | 1,1 kW | 1,1 kW | |
| Hydraulic System | Tank capacity | 30 L | 30 L |
| Pressure | 35 bar | 35 bar | |
| Motor power | 1,1 kW | 1,1 kW | |
| General Data | Width (compact – premium) | 1,75 – 2,1 m | 1,75 – 2,1 m |
| Lenght (compact – premium) | 1,84 – 2,1 m | 1,84 – 2,1 m | |
| Height (compact – premium) | 1,79 – 2,0 m | 1,79 – 2,0 m | |
| Spindle center height from floor | 1,1 m | 1,1 m | |
| Weight (compact – premium) | 2450 – 2750 kg | 2500 – 2800 kg | |
| Total power | 10,3 kW | 12,3 kW | |
| Voltage | 380 V | 380 V | |
| Frequency | 50 Hz | 50 Hz | |
| Controller | Model name | Fanuc 0i-TF Plus | Fanuc 0i-TF Plus |
| Screen size | 10,4 inches | 10,4 inches | |
| Interpolated axes | 3 | 3 | |
| Tool number | 128 | 128 | |
| Program memory | 2 mb | 2 mb | |
| Communication system | F/O | F/O |
inch/metric conversion
mirror image
DNC operation
polar coordinate interpolation
cylindrical interpolation
polygon turning
tool life management
background editing
extended program memory to 2GB
manual handle retrace
manual guide-i
Hydraulic 3 jaw Chuck
Hydraulic 4 jaw Chuck
High pressure coolant pump for inner tool cooling cutting
Single bar feeder
Automatic magazine bar feeder
Removable static guide bush(sliding head for swiss turning)
Automatic power off relay
1 year warranty extension
Uninterruptible power supply
Additionnal ID tool holder
Additionnal OD tool holder
Additional axial driven tool
Additionnal radial driven tool
Automatic opening door for robot applications
Removable pneumatic tailstock
servo learning oscillation
tool retract and recover
circular thread cutting
eccentric turning
helical interpolation
Tool break detection
