Basic Machines with C axis
Inside illumination
Coolant pump
Warning lamp
Balancing plate, screws, nuts and wedges
Automatic central lubrication
Collet chuck and key
Single driven tool block
C axis control
Spindle brake
Foot pedal for chuck control
3 pcs of OD tool holders
4 pcs of ID tool holders
Electronic handwheel
Part catcher
Chip conveyor
Voltage transformator
Bar feeder interface
Air and coolant gun
2 years full warranty
Heat exchanger for electrical cabinet
Phase protection relay
Safety door switch
Maintenance handbook
Operating handbook
| Mekamat | 5BC | 6BC | |
|---|---|---|---|
| Work area | max. Turning lenght | 150 mm | 150 mm |
| max. Turning Diameter | 360 mm | 360 mm | |
| X Axis Movement | 450 mm | 450 mm | |
| Z Axis Movement | 230 mm | 230 mm | |
| Y Axis Movement | - | - | |
| Slant bed | 22,5° | 22,5° | |
| max. Pay load | 40 kg | 50 kg | |
| Spindle | max. Chuck holding diameter | 110 mm | 140 mm |
| Chuck size | 5 inches | 6 inches | |
| Spindle nose | Flat 110 | Flat 140 | |
| Collet type | 163E | 173E | |
| Spindle inner diameter | 33 mm | 43 mm | |
| Bearing diameter | 60 mm | 70 mm | |
| max. Bar diameter | 32 mm | 42 mm | |
| Motor power (continuous/30 min.) | 3,7/5,5 kW | 5,5/7,5 kW | |
| max. RPM | 6000 rpm | 5000 rpm | |
| Rated Torque | 35 Nm | 48 Nm | |
| Motor coupling | timing belt | timing belt | |
| C axis positioning | 0,001° | 0,001° | |
| Brake torque | 23 Nm | 23 Nm | |
| Machine Axes | X/Z Axis Motor Power | 0,75 kW | 0,75 kW |
| Y Axis Motor Power | - | - | |
| X/Z Axis ball screw (dia./pitch) | 25/10 mm | 25/10 mm | |
| Y Axis ball screw (dia./pitch) | - | - | |
| X/Z Axis rapid travel speed | 36 m/min | 36 m/min | |
| Y Axis rapid travel speed | - | - | |
| Guide system | Linear | Linear | |
| Live Tools | Axial live tool number | 0-1 | 0-1 |
| Radial live tool number | 0-1 | 0-1 | |
| Motor power (continuous/30 min.) | 1,2 kW | 1,2 kW | |
| Tool size | ER20 | ER20 | |
| max. RPM | 3000 rpm | 3000 rpm |
| Mekamat | 5BC | 6BC | |
|---|---|---|---|
| Turret | Station number | - | - |
| Positioning system | - | - | |
| Tool to tool rotation time (including locking) | - | - | |
| Total rotation time (180°) | - | - | |
| Clamping force | - | - | |
| Repetition accuracy | - | - | |
| Positioning accuracy | - | - | |
| Tool size | - | - | |
| Tool mounting standard | - | - | |
| Tool Holders | OD Tool holders | 16 mm | 20 mm |
| ID Tool holders | 20 mm | 20 mm | |
| Coolant System | Tank capacity | 135 L | 135 L |
| Flow rate | 85 L/min | 85 L/min | |
| Pressure | 5 bar | 5 bar | |
| Motor power | 1,1 kW | 1,1 kW | |
| Hydraulic System | Tank capacity | 30 L | 30 L |
| Pressure | 35 bar | 35 bar | |
| Motor power | 1,1 kW | 1,1 kW | |
| General Data | Width (compact – premium) | 1,75 – 2,1 m | 1,75 – 2,1 m |
| Lenght (compact – premium) | 1,84 – 2,1 m | 1,84 – 2,1 m | |
| Height (compact – premium) | 1,79 – 2,0 m | 1,79 – 2,0 m | |
| Spindle center height from floor | 1,1 m | 1,1 m | |
| Weight (compact – premium) | 2200 – 2500 kg | 2250 – 2550 kg | |
| Total power | 7,7 kW | 9,7 kW | |
| Voltage | 380 V | 380 V | |
| Frequency | 50 Hz | 50 Hz | |
| Controller | Model name | Fanuc 0i-TF Plus | Fanuc 0i-TF Plus |
| Screen size | 10,4 inches | 10,4 inches | |
| Interpolated axes | 3 | 3 | |
| Tool number | 128 | 128 | |
| Program memory | 2 mb | 2 mb | |
| Communication system | F/O | F/O |
inch/metric conversion
mirror image
DNC operation
polar coordinate interpolation
cylindrical interpolation
polygon turning
tool life management
background editing
extended program memory to 2GB
Hydraulic 3 jaw Chuck
Hydraulic 4 jaw Chuck
High pressure coolant pump for inner tool cooling
Single bar feeder
Automatic magazine bar feeder
Removable static guide bush(sliding head for swiss turning)
Automatic power off relay
1 year warranty extension
Uninterruptible power supply
Additionnal OD tool holder
Additionnal ID tool holder
Automatic opening door for robot applications
-manual handle retrace
dynamic graphic display
-turn mate-i
servo learning oscillation
tool retract and recover
circular thread cutting
eccentric turning
